China Bending Machine manufacturers Press brake is a machine that uses the equipped mold (general or special mold) to bend the cold metal sheet into various geometric cross-sectional shapes. Press brake can quickly realize the actions of sliding down, jogging, continuous, pressure holding, return stroke and halfway stop, and bend multiple elbows of the same angle or different angles in one feeding.
Blue Blue White鈥檚 press brake adopts a special CNC system for the bending machine. The coordinate axis of the bending machine has been changed from a single axis to 12 axes, and the numerical control system can automatically realize the sliding depth control, the left and proper tilt adjustment of the sliding block, the front and back adjustment of the back stopper, the left and right adjustment, the pressure tonnage adjustment and the slider approaching speed adjustment etc.
Feature and Advantage
鈻?/strong>聽Manual Upper Tool Clamping is made of all raw material provided by qualified suppliers, whose chemical composition is corresponding to international standards. Therefore, the upper tool clamping is standardized with a 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.
Advantage:
路聽Safe and fast tool change
路聽Can be used without modifying Europe type punches
路聽Front clamp - vertical tool change
路聽Rear clamp - horizontal tool change
鈻?/strong>聽German Bosch Rexroth Proportional valve, a fully closed-loop electro-hydraulic servo high-frequency synchronous control system is adopted to ensure that the machine tool has high stability and high precision in the process of high-speed operation.
Advantage:
路聽The response frequency can be as high as 200Hz.
路聽Closed-loop control, signal feedback.
路聽Original German imported products, longer service life.
路聽It can continuously and proportionally control the pressure and flow of the hydraulic system, the position, speed, force, and reduce the impact of pressure changes.
鈻?/strong>聽High rigid backgauge, driven by HIWIN ball screw controlled by servo motor, running a 2 HIWIN linear guide rails.
Advantage:
路聽Precise gauge, +/-0.01mm
路聽Fast positioning, 500mm/s
路聽Fingers with double stop and micrometric adjustment.
鈻?/strong>聽Electric mechanical crowning, means precise positioning and alignment of the crowning table, ensure precise bending angel.
Advantage:
路聽Easy and fast adjustment
路聽Europe type dies with 60 mm and 90 mm
路聽Base can be clamped as well as single dies with 13 mm tang
鈻?/strong>聽Tandem Link, option for machines longer than 6m.
Advantage:
路聽4 points guide rails and cylinder spherical floating support structure, brings strong anti-unbalance loading ability.
路聽Customized solutions provided. You can freely choose the bending force, bending length.
鈻?/strong>聽Italy DSP Laser Protection, DSP laser protection is necessary if you have a high safety requirement.
Advantage:
路聽Laser protection, Multi beam Receiver
路聽Protective areas, Front, center and rear.
路聽The safety level is CAT.4 and SIL3
路聽Detection Case protection degree: IP 65
路聽Laser classification: class 1 M
路聽Response time: 5ms
路聽Change Speed Point: 5mm + Stopping Space
路聽The maximum protective distance is up to 15M
路聽LED indicators show various states
鈻?/strong>聽Front Sheet Follower Supports System, The hydraulic press brakes with Sheet supports follower system for bending long and thin sheets, It basically consists of a pair of sheet supports placed on the front of the machine at the height of the bending line (bottom tool). Supports are controlled by the CNC, following and supporting the sheet during the bending process.聽
Advantage:
路聽Automatic bending follower supports
路聽AP1 - AP2 CNC-controlled interpolated axes
路聽ecommended for heavy parts or large thin plate
路聽Bend as closed as 70掳
路聽Load capacity 鈥?180 kg per support
路聽Brush and support shaft dim 350x900 up to 1200 mm
鈻?/strong>聽Wila Hydraulic Clamping System:
The Wila鈥檚 鈥楴ew Standard鈥?Tooling System has become market leader for precision, quality and flexibility for the Krrass hydraulic press brakes for sale, the WILA鈥檚 state-of-the-art clamp system聽
Advantage:
路聽Long service life: >10 years
路聽Quick clamping for WILA style tooling
路聽Simple push-button loading
路聽Fast and safe tool changes: Reduce 80% time
路聽High-precision bending angle and flange edge
Specification
Standard equipment:
路聽DELEM DA-53T Controller
路聽Electrical parts: Schneider - France
路聽Main Motor: Siemens Motor - Germany
路聽Servo motor: ESTUN
路聽Hydraulic System: Bosch Rexroth - Germany
路聽Oil Pump: HEYAN - China
路聽Sealing Ring: PARKER - America
路聽Tube Connector: EMB - Germany
路聽Linear guide and ball screw: HINWIN - Taiwan
路聽Grating ruler: Fagor
路聽High-pressure internal gear pump: ECKERLE - Germany
Typical CNC hydraulic press brake
MODELPB-11032PB-11041PB-17032PB-17041PB-25041PB-32041
Bending force (kN)110011001700170025003200
Bending length (mm)320041003200410041004100
Distance between uprights (mm)270036002700360033003300
Throat depth (mm)400400400400400400
Beam stroke (mm)200200200200250250
Opening height (mm)480480480480530530
Beam max approaching speed (mm/s)180180160160130120
Beam max working speed (mm/s)1010101099
Beam max returning speed (mm/s)13013012012010090
Main motor power (kW)7.57.511111522
Oil tank volume (L)320320400400500600
Dimension LxWxH (mm)3600x1800x26704600x1800x27503600x1900x27304600x1900x28504600x2050x31504600x2050x3550
Weight (kg)80001050010000135001850022000
Heavy-duty Tandemlink CNC hydraulic press brake
MODELPB-40041PB-60062PB-80082PB-1200120
Bending force (kN)40006000800012000
Bending length (mm)41006200800012000
Distance between uprights (mm)3300500065009500
Throat depth (mm)400500500600
Beam stroke (mm)300350350400
Opening height (mm)580630630680
Beam max approaching speed (mm/s)11010010090
Beam max working speed (mm/s)8888
Beam max returning speed (mm/s)90757060
Main motor power (kW)30457590
Oil tank volume (L)1000150018002400
Dimension LxWxH (mm)4800x2500x38006800x2900x51006800x2900x555012600x3600x7850
Weight (kg)2800056000110000206000
Application
Suitable for all industries, especially for stainless steel decoration industry.China Bending Machine manufacturers
website:http://www.bluebluewhite.com/bending-machine/